Darning Foot for Memory Craft Embroidery Machines

Machine Settings:

Stitch:  Zigzag Stitch

Thread tension:  "Auto" or 3 - 5

Stitch length:  Any

Stitch Width:  0 - 7

Feed Dog:  Down

1.  Attach the darning foot to the presser bar with the lever over the needle clamp screw.

2.  Draw an outline for darning onto the fabric with tailor's chalk and Place the fabric under the needle.

3.  Lower the presser foot lifter to engage the needle thread tension.

4.  At a medium speed, stitch along the marked outline with the desired zigzag width, guiding the fabric carefully by hand.

5.  After free hand embroidery is completed, raiser the feed dog for normal sewing.

200-325-000